Bollard clicking but not moving
Check that the Bollard is not in manual mode
Check that there is power on the bollard
Do the Automatic learning process
Related Articles
How to connect Master and Slave bollard
Please look at the wiring diagram how to connect Master and slave bollard: Also some programming is needed: In this case you just install photocells for master bollard.
Bollard does not work with the App
Standard reset procedure Check if they can hear a clicking noise when they give a command with the app Check if the light on the Brain is working correctly (it should be red and turn green when you restart the brain Client should give any impulse by ...
Bollard photocells
Two pairs of photocells are always delivered together with Parklio Bollard device and connected to the control box using a UTP cable. Every photocell has its own transmitter that must be installed on site depending on the Bollard desired position. ...
Emergency Bollard lowering
In case your bollard is not working properly and you need to get it lowered, use physical keys you got with your Parklio Bollard to unlock the Bollard and lower it manually. After unlocking, the Parklio Bollard will descend automatically. In case of ...
Bollard IP rating
Bollard's IP rating is IP 55. Protected from limited dust ingress. Protected from low pressure water jets from any direction.