How to reboot ANPR camera from PMS

How to reboot ANPR camera from PMS

Please check steps for rebooting camera if it is online in PMS:
1. Log in to PMS
2. Click on ANPR tab


3. Click on camera (product) you want to reboot


4. Click on System control and you will find Reboot button

5. Please wait few minutes before camera is back online

    • Related Articles

    • Supported license plates for ANPR camera

      ANPR camera can support all license plates on list below and if your country is not on the list that means you probably need special firmware for camera. In that case you need to address in which country camera would be used to our sales department ...

    • There is no internet connection to ANPR

      If your ANPR works in HIK interface but can not connect to Parklio PMS system it is probably because your internet connection has firewall. If the network has a firewall enabled you may need to enable the camera to access the remote hosts. The list ...

    • ANPR package content

      Before installing the camera read the quick installation guide included in the camera box. The camera package should contain the following items: 1x ANPR Camera 1x QR Code 8x Waterproof tape 4x Mounting screws with dowels 1x Cable gland 1x Allen ...

    • Parklio API Integration with HikCentral Management and ANPR Functionality

      Compatibility with HikCentral Management The Parklio API does not have direct compatibility with the HikCentral management system. However, users can leverage the Parklio API to integrate with HikCentral management and control barriers as needed. ...

    • How to Import License Plates into PMS Using a CSV File

      If you need to add multiple license plates at once, the fastest and most efficient method is importing them through a CSV file. Follow the steps below to complete the process. Step 1: Open the ANPR Section in PMS Inside the PMS dashboard, select the ...