Client cannot add camera with the App

If you can not add camera to Parklio App, please contact support@parklio.com and send MAC address for camera so we can check that camera has been added to our system.

Example of MAC address for Camera:

• Related Articles

• Supported license plates for ANPR camera

  ANPR camera can support all license plates on list below and if your country is not on the list that means you probably need special firmware for camera. In that case you need to address in which country camera would be used to our sales department ...

• Positioning the camera

• ANPR package content

  Before installing the camera read the quick installation guide included in the camera box. The camera package should contain the following items: 1x ANPR Camera 1x QR Code 8x Waterproof tape 4x Mounting screws with dowels 1x Cable gland 1x Allen ...

• ANPR mounting options and connections

  Wall Mount Option To install the camera on a wall follow the instructions illustrated below: Pole Mount Option For mounting the camera to a pole a pole mounting kit is needed. The pole mounting kit is not included with the camera. To mount the camera ...

• Parklio devices and connection to ANPR

  Parklio Gate: Connect the camera ALARM terminals (terminals 1A and 1B) to AP and COM (6) terminals on the Gate control electronics. Note: When using the camera, it is recommended to enable automatic closing of the gate Parklio Bollard: Connect the ...