Plates not being detected

Plates not being detected

If plates are not recognized in PMS please follow next steps:

  1. Check if camera is online in the PMS and HIK web interface
  2. In HIK web interface got to: VCA/Road Traffic/Detection Configuration for Area Settings and Armin Schedule and Linkage Method and from here check the following:

  3. Type needs to be set to Vehicle detection

  4. Enable button must be checked

  5. Lanes need to be set correct as explained in UM

  6. Select mode need to be Entrance/Exit

  7. Detection mode set to Vehicle Priority

  8. In the Armin Schedule and Linkage Method disable all the Trigger Alarm Outputs like this:


  10. Save all settings



    • Related Articles

    • Supported license plates for ANPR camera

      ANPR camera can support all license plates on list below and if your country is not on the list that means you probably need special firmware for camera. In that case you need to address in which country camera would be used to our sales department ...