HIK ANPR package content

HIK ANPR package content

Before installing the camera read the quick installation guide included in the camera box. The camera package should contain the following items:

  1.  1x ANPR Camera
  2. 1x QR Code
  3.  8x Waterproof tape
  4.  4x Mounting screws with dowels
  5. 1x Cable gland
  6. 1x Allen wrench
  7.  1x Screw terminals
  8. 1x Connection cable
  9. 2x Quick start guide
  10. 1x CD

If any of the parts are incorrect, missing, or damaged, contact your Parklio dealer. Keep the original packing materials, in case you need to return the product for repair.

    • Related Articles

    • There is no Internet Connection to HIK ANPR

      If your ANPR works in HIK interface but can not connect to Parklio PMS system it is probably because your internet connection has firewall. If the network has a firewall enabled you may need to enable the camera to access the remote hosts. The list ...

    • Plates Not Being Detected - HIK ANPR

      If plates are not recognized in PMS please follow next steps: Check if camera is online in the PMS and HIK web interface In HIK web interface got to: VCA/Road Traffic/Detection Configuration for Area Settings and Armin Schedule and Linkage Method and ...

    • Supported license plates for HIK ANPR camera

      ANPR camera can support all license plates on list below and if your country is not on the list that means you probably need special firmware for camera. In that case you need to address in which country camera would be used to our sales department ...

    • How to connect HIK ANPR to Parklio product (hardware)

      On the pictures below you can see connection between Parklio ANPR and any other product. This step is important during installation as all connection have to be exact like this: ANPR can be powered by POE (Power over internet) or adapter. Adapter is ...

    • How to reboot HIK ANPR camera from PMS

      Please check steps for rebooting camera if it is online in PMS: 1. Log in to PMS 2. Click on ANPR tab 3. Click on camera (product) you want to reboot 4. Click on System control and you will find Reboot button 5. Please wait few minutes before camera ...