Parklio devices and connection to ANPR

• Related Articles

• Parklio devices with ANPR and connections

  Parklio Gate: Connect the camera ALARM terminals (terminals 1A and 1B) to AP and COM (6) terminals on the Gate control electronics. Note: When using the camera, it is recommended to enable automatic closing of the gate Parklio Bollard: Connect the ...

• There is no internet connection to ANPR

  If your ANPR works in HIK interface but can not connect to Parklio PMS system it is probably because your internet connection has firewall. If the network has a firewall enabled you may need to enable the camera to access the remote hosts. The list ...

• How to connect ANPR to Parklio product (hardware)

  On the pictures below you can see connection between Parklio ANPR and any other product. This step is important during installation as all connection have to be exact like this: ANPR can be powered by POE (Power over internet) or adapter. Adapter is ...

• ANPR package content

  Before installing the camera read the quick installation guide included in the camera box. The camera package should contain the following items: 1x ANPR Camera 1x QR Code 8x Waterproof tape 4x Mounting screws with dowels 1x Cable gland 1x Allen ...

• ANPR mounting options and connections

  Wall Mount Option To install the camera on a wall follow the instructions illustrated below: Pole Mount Option For mounting the camera to a pole a pole mounting kit is needed. The pole mounting kit is not included with the camera. To mount the camera ...