Related Articles
Gateway technical specifications
Input Voltage 85 VAC - 264 VAC 120 VDC - 370 VDC Frequency 47 Hz - 440 Hz AC Current (Typ.) 0.35 A / 230 VAC (1) Inrush current 40 A / 230 VAC Working temperature range -20 °C - +60 °C Working humidity Up to 90% RH Operating altitude 1000 m Ingress ...
Gateway ID and password
On the Gateway back side there is a sticker with the gateway UUID (Unique ID / Serial Number) identifying the gateway. Please keep this in mind, the serial number is used when adding the gateway to the user account and when accessing the gateway web ...
Connecting to Gateway interface
To access the web interface of the product, simply use a browser to connect to http://ipAddress:8765 (http://ipaddress:8443 is also available for 2.0.8 firmware) , where ipAddress is the gateways IP address. When logging in to the gateway interface ...
Gateway signal for barrier
For normal functioning, the signal between Gateway and the Barrier should be at least -80 dBm when car is not over barrier. When car is over barrier it is considered as object and it is normal that barriers have low signal due to obstacle.
Client erased Gateway from App
If you erased Gateway from App and you want to add it again follow next procedure: Reset Gateway manually by clicking shortly on Reset button on Gateway Al light should make short blink Go to application, enter parking lot and add Gateway again