Parklio

Popular Articles
Barrier is jammed
If your barrier is jammed there could be multiple reasons and solutions. First check if your barrier is hit, there could be deformations in safety pin and arch and in that case only installing new parts can resolve situation. Also if you barrier is ...
Battery not responding
If LED light on Parklio barrier battery is not lighting, there are two solutions: 1. Battery is fully charged 2. Battery is damaged and needs to be replaced Best way to check this is to connect battery to barrier and check battery status in settings.
Connecting arm LED light for Gate
To connect Gate arm LED light to control board you need to do next: 1. Connect red wire from LED light to LUC(+) 2. Connect black wire from LED light to COM(+) Connectors are marked on picture with red circle:
Keyfob battery change - Barrier
Please watch video on this link: https://drive.google.com/file/d/1E2COe2Cf0fc9YfWmZMvF6YBJ6BjgMHOJ/view?usp=sharing It is important to use something sharp as scalpel.
Blocked keys in Connect App
When user of shared keys delete barrier from their App shared key will automatically become blocked on Admin App. Users should exit App or disconnect from Barrier, not delete it

Recent Articles
PMS Page Goes Blank or Becomes Unresponsive After Clicking a Command?
If clicking on a command inside the PMS causes the page to go blank, ignore the action, or become unresponsive, the issue is likely due to your browser's automatic translation feature. This typically happens when the browser is set to translate ...
Electrical connections for installation
Before proceeding with the physical installation of the chain system, it is essential to prepare the power supply connections. 1. Power Supply to Master Unit The primary connection involves supplying power to the master unit. Use a 230V-50Hz power ...
How to Calibrate the Chain?
(Note: Parklio™ Chains come pre-calibrated from the factory. Calibration is only required if the chain length has been changed or adjusted. In some cases due to transport and installation Chain is required to be calibrated) Step-by-Step Calibration ...
How to delete Barrier from App
In attachment you can find video with process showing how to delete Parklio barrier from Connect App.
How to Connect Two Gates to Operate Simultaneously
To synchronize two gates so they operate at the same time, follow these steps: 1. Connect the Bus Terminals Begin by connecting the bus terminals of the master and slave control units. Important: Ensure that both control units are powered off, and ...

Popular Articles