Recent Articles
Purchasing Licenses for Parklio PMS Products
To use products within the Parklio PMS system, it is necessary to purchase the appropriate licenses for the products you intend to use. Each product requires its own license before it can be activated and managed inside the system. Licenses are ...
LED Light Constantly On – Troubleshooting Guide
If the LED light on the barrier is constantly on (not blinking), this may indicate a hardware issue. There are several possible causes that should be checked in the following order. Possible Causes and How to Check 1. Cover Issue In some cases, the ...
Error Message: “Something Went Wrong” When Adding a Barrier in the Parklio App
What to Do 1. Check the LED Indicator The client should check the LED light status on the barrier according to the official instructions available here: https://support.parklio.com/portal/en/kb/articles/how-to-check-error-on-barrier The LED signal ...
How to reboot ANPR camera from PMS
Please check steps for rebooting camera if it is online in PMS: 1. Log in to PMS 2. Click on ANPR tab 3. Click on camera (product) you want to reboot 4. Click on System control and you will find Reboot button 5. Please wait few minutes before camera ...
Chain Installation Guide: Power Supply, Master/Slave Setup & Photocells
Before installing the Chain unit itself, it is necessary to complete the power supply installation and connect the master and slave units according to the instructions provided in the user manual. Proper preparation ensures smooth operation and ...