Parklio Gate
Optimizing Gate Performance: Adjustable Settings for Arm Travel Speed
When a gate is set up in production and shipped, it comes with factory-adjusted values for arm travel speed, acceleration, and deceleration during opening and closing. However, since clients and parking lots have different layouts and requirements, ...
What is the Maximum Number of Remotes That Can Be Added for a Gate Barrier?
The maximum number of remotes that can be added to a gate barrier depends on the specific model. Most modern gate barriers have a fixed limit for the number of remotes they can store, which is typically determined by their receiver's memory capacity. ...
Remotes for Gate specifications
Technical Specifications of Gate Remote Control Here are the key technical data for the Gate Remote Control: Number of Keys: 2 Number of Code Combinations: 65,536 Transmission Frequency and Modulation: 433.92 MHz AM/ASK Maximum Reach in Unobstructed ...
Programming remotes for Gate
If client bought remote controller after receiving Gate it should be programmed first. Remote for Gate is programmed directly to Gate control board , more precisely receiver, and can not be programmed over App. To program remote control to Gate , ...
Solar Gate - Display and function buttons
Returns to the display of the MENU page / moves the cursor upwards to select the MENU Moves forwards with the display of the MENU page / moves the cursor downwards to select the MENU option ENTER - Enters the MENU, displaying the cursor on the first ...
Solar Gate - Orientation of the photovoltaic panels
The photovoltaic panel should be angled at 40° relative to the horizontal plane: - towards the SOUTH if installed in the Northern Hemisphere (north of the equator) - towards the NORTH if installed in the Southern Hemisphere (south of the equator).
Solar Gate - Product description and technical specifications
The Inverter board provides the PARKLIO GATE control units with the optimal power supply voltage to allow the operation of the automated system, using a 12V battery pack and photovoltaic panels. The Inverter is equipped with a 128x64 dot LCD display ...
Parklio Gate technical Characteristics
Technical characteristic for Parklio Gate 4 Technical characteristic for Parklio Gate 6
Parklio Gates dimensions
Parklio Gates come in few dimensions but also should be noted that every dimension is possible and there are endless combinations for arm length. You can always send your request to our sales department and check availability, prices and delivery ...
Parklio Gate components
Barrier unit cabinet, in carbon steel with anti-corrosion treatment and painted Key release with standard lock Boom support arm rear cover Elliptical boom up to 3 m, in white painted aluminum with slot cover profiles and shock-resistant rubber or ...
Gate default settings (control board)
These are the default settings for the Parklio Gate and should not be altered without consulting Parklio support. You should only check these settings if the Gate isn’t functioning correctly. Any necessary adjustments will be made at our production ...
Adding RFID cards to Gate
Turn on RFID. Begin by placing the first card on the reader. When you hear two beep sounds, the cards has been successfully added. Repeat the same process for the second card. Wait 1 minute. The two cards that were added are now designated as master ...
Display is showing error STOP
This happens because the Gate is getting a signal that the lock mechanism is opened. The first solution is to check if the Gate is locked properly. Important: A Gate with a 4m arm can have a different lock mechanism. The second solution is to check ...
Connecting Timer to Gate - Wiring diagram
If you purchase Timer after you already received Gate you will need to connect it properly, please find all the detail below: Connect : TIMER Power + / 24 V+ -> GATE +24V (13) TIMER Power - / 24 V- -> GATE COM (12) TIMER COM -> GATE COM (34) TIMER ...
Connecting Brain device to Gate - wiring diagram
Please find below all the details of connecting Brain device to Gate: For any other question about wiring and connection details please contact support@parklio.com
Standard (STAND ALONE) acquisition procedure:
This process is important to do after adjusting spring on Gates. To do acquisition procedure follow next steps: 1. Your arm is locked and in down position 2. Press and hold PROG for 4 seconds. APP- is shown on the display. 3. Unlock arm (there are ...
Changing arm side (DATA error)
If user wants to change side of arm on their own they should read instructions in User Manual, chapter 3.6.: When changing side of arm it is possible that you will get DATA error on control board display and Gate will not work properly. DATA error ...
Alarms and faults on display inside Gate
There are multiple errors that can be displayed inside control board on Gate. Please find below explanation for each error and how to possibly solve it. In case you are not familiar with this kind of action, please contact Parklio support to give you ...
How to connect timer to disable Brain
If client wants to use timer to disable Brain usage on Gate he should connect timer like in scheme: In this case when N.C. is connected to AP, when timer is on it will be possible to use Brain with App. In case when N.O. is connected to AP and timer ...
How to connect antenna 433 on Gate
On pictures you can find right way to connect antenna. Connection on top cover has to be waterproof.
Connecting photocells
For all Gates we use Hiland P5141 Photocells. They are connected on Gate's control board like this: 1. Power supply From 12V-24V to 24 (Nr. 14) and COM (Nr. 13) 2. Signal From Photo to COM (Nr. 25) i FT(Nr. 24)
Connecting arm LED light for Gate
To connect Roger Gate arm LED light to control board you need to do next: 1. Connect red wire from LED light to LUC(+) 2. Connect black wire from LED light to COM(+) Connectors are marked on picture with red cirlce: