Parklio ANPR
Parklio API Integration with HikCentral Management and ANPR Functionality
Compatibility with HikCentral Management The Parklio API does not have direct compatibility with the HikCentral management system. However, users can leverage the Parklio API to integrate with HikCentral management and control barriers as needed. ...
Supported license plates for ANPR camera
ANPR camera can support all license plates on list below and if your country is not on the list that means you probably need special firmware for camera. In that case you need to address in which country camera would be used to our sales department ...
There is no internet connection to ANPR
If your ANPR works in HIK interface but can not connect to Parklio PMS system it is probably because your internet connection has firewall. If the network has a firewall enabled you may need to enable the camera to access the remote hosts. The list ...
Parklio devices with ANPR and connections
Parklio Gate: Connect the camera ALARM terminals (terminals 1A and 1B) to AP and COM (6) terminals on the Gate control electronics. Note: When using the camera, it is recommended to enable automatic closing of the gate Parklio Bollard: Connect the ...
Positioning the camera
ANPR mounting options and connections
Wall Mount Option To install the camera on a wall follow the instructions illustrated below: Pole Mount Option For mounting the camera to a pole a pole mounting kit is needed. The pole mounting kit is not included with the camera. To mount the camera ...
ANPR package content
Before installing the camera read the quick installation guide included in the camera box. The camera package should contain the following items: 1x ANPR Camera 1x QR Code 8x Waterproof tape 4x Mounting screws with dowels 1x Cable gland 1x Allen ...
Client cannot add camera with the App
If you can not add camera to Parklio App, please contact support@parklio.com and send MAC address for camera so we can check that camera has been added to our system. Example of MAC address for Camera:
Plates not being detected
If plates are not recognized in PMS please follow next steps: Check if camera is online in the PMS and HIK web interface In HIK web interface got to: VCA/Road Traffic/Detection Configuration for Area Settings and Armin Schedule and Linkage Method and ...
Parklio devices and connection to ANPR
Parklio Gate: Connect the camera ALARM terminals (terminals 1A and 1B) to AP and COM (6) terminals on the Gate control electronics. Note: When using the camera, it is recommended to enable automatic closing of the gate Parklio Bollard: Connect the ...
ANPR installation
Installation Angle The installation angle must meet the requirements below: • The Vertical angle should not exceed 30 degrees. • The Horizontal angle should not exceed 30 degrees Installation height and distance The camera Height (H) should be 1,6m ...
How to connect ANPR to Parklio product (hardware)
On the pictures below you can see connection between Parklio ANPR and any other product. This step is important during installation as all connection have to be exact like this: ANPR can be powered by POE (Power over internet) or adapter. Adapter is ...