Write_Characteristic_Error
Is a more detailed error during key exchange.
Mostly, it happens when Bluetooth gets an error. Most frequently, it is caused by a weak battery or a defective or badly connected antenna. A bad Bluetooth signal may also be the cause of this error.
Related Articles
Key exchange error
SCAN_FAILED_DEVICE_NOT_FOUND The phone was not able to find the device during a rescan. This might go away by simply retrying again. If not, ensure that the device is properly connected. Also ensure that the device has the LOCATION PERMISSIONS needed ...
Invalid Token error
If you get Invalid Token error while connecting to Parklio barrier, try to log out from Parklio Connect App and log in again. If logging has not fixed this error problem is probably in Bluetooth antenna and cover should be replaced.
Error list for LED light on barrier
If you are experiencing troubleshooting during usage of barrier you can check LED light on electronic box which can give you description of hardware problem if there is any. LED light will blink in certain sequence and you can find explanation in ...
How to solve dirty sensor error
After cleaning the device sensor, the device sensor does not automatically change the state since the laser is only triggered by environmental changes to preserve battery life. Steps to remove the error: Remove any obstruction on the laser Clean the ...
Troubleshooting Guide: Understanding Parklio Barrier LED Indicator
The Parklio Barrier is designed to diagnose and display most errors autonomously. Located on the front side of the electronic box is a reset button with an integrated LED light. Normal Operation: The LED light remains off when the barrier is ...