Weak Bluetooth Signal
If the Barrier can only be operated from a short distance, please provide a photo of the antenna. Clean the laser sensor using a non-abrasive cleaning solution and test the system again. You may create a support ticket on our support page or contact us directly at support@parklio.com
The image showing the position of the laser sensor on the Parklio Barrier can be found at the following link:
Related Articles
Key Exchange Error - Write_Characteristic_Error
This is a more detailed error during key exchange. Mostly, it happens when Bluetooth gets an error. Most frequently, it is caused by a weak battery or a defective or badly connected antenna. A bad Bluetooth signal may also be the cause of this error.Barrier Connection Error - No Device Found
If the Barrier has been working normally and suddenly stops connecting to the Parklio App, follow the steps below to identify and resolve the issue. 1. Check whether the Barrier is powered on Make sure the Barrier is turned on. When the battery is ...Bluerooth Conectivity Range of Parklio Barrier
The Barrier uses Bluetooth Low Energy (BLE) to communicate with your smartphone. Typical range: up to 100 meters in open areas. Normal urban range: approximately 30–50 meters, depending on obstacles and interference.Adding a Keyfob to a Barrier
Before adding a Keyfob, make sure Bluetooth, Location, and internet access are enabled on your mobile phone. To add a new Keyfob, follow these steps: Connect to the Barrier. In Settings, tap Add Keyfob. Press and hold the button on the receiver until ...Adding a Barrier to the Connect App
To add a Barrier to the Connect App: 1. Turn on Location, Bluetooth, and mobile data. 2. Open the app. 3. Tap the + icon in the top-right corner. 4. Tap the Barrier you want to add. 5. The Barrier will connect and appear in My Parklios. You can find ...