Programming Remotes for the Gate
If the remote was purchased after the gate was delivered, it must be programmed directly to the gate's control board.
To program remote control to Gate, please follow the next procedure:
1. Open the Gate cover and find receiver
2. Press the first button on the receiver until the red light on receiver is on
3. Press the left button on remote
4. Wait untill the red light on the reciever turns off
5. Remote is programmed to open the Gate
Image of the receiver
You can find the image of the reciever at the following link: https://file.parklio.co/file/hvymv69031a09e43f481592205be462ebc103
Video instructions for pairing are available on the link: https://drive.google.com/file/d/1BTxG7Nix3JyxBaE-w7RmOT4J1QCZSOeV/view?usp=sharing
If you haven't bought receiver together with Gate it is necessary to purchase one or it won't be possible to program the remote controller.