New Battery Update for Parklio™ Barrier – Starting December 2024

New Battery Update for Parklio™ Barrier – Starting December 2024

Starting December 2024, the Parklio™ Barrier will feature a cutting-edge battery system with the following enhancements:

Key Updates:

  1. Integrated Charging Connection

    • The new battery pack eliminates the separate charger input.
    • Chargers will now connect directly to the cable linked to the electronics box.
      (Refer to the illustration below for details.)

  2. Relocated LED Status Light

    • Battery status indicators (charging, charged, or damaged) will be located on the charger, instead of on the battery pack.

  3. New Charger Compatibility

    • A redesigned charger will be introduced with the upgraded batteries.
    • Important: The new charger is incompatible with previous battery models (and vice versa).

  4. Universal Charger for All Capacities

    • A single charger now supports both single-capacity and double-capacity batteries.
    • Users purchasing additional batteries no longer need multiple chargers – one charger does it all!

  5. LED Light for Charging Status

    • The charger features an LED light for battery status:
      • Red Light: Battery is charging.
      • Green Light: Battery is fully charged.

  6. Faster Charging Time

    • Charging time is now significantly reduced.
    • The upgraded battery will be fully charged in just 2 hours.

These updates simplify battery management, improve usability, and enhance your Parklio™ experience.

For questions or further details, don’t hesitate to contact us.


You can find the photo of the Parklio Barrier battery at the following link:

    • Related Articles

    • Adding a Keyfob to a Barrier

      Before adding a Keyfob, make sure Bluetooth, Location, and internet access are enabled on your mobile phone. To add a new Keyfob, follow these steps: Connect to the Barrier. In Settings, tap Add Keyfob. Press and hold the button on the receiver until ...

    • How to Resolve the “Dirty Sensor” Error

      After cleaning the device sensor, the device sensor does not automatically change the state since the laser is only triggered by environmental changes to preserve battery life. Steps to remove the error: Remove any obstruction on the laser Clean the ...

    • Barrier's Battery Status Overview in Parklio Connect

      The battery level is shown as a percentage on the main product page and is categorized as follows: ? Good: 70% – 100% ? Moderate: 31% – 69% ? Charge: 30% and below When the battery level reaches 30% or lower, a warning message will appear: “Charge ...

    • Parklio Barrier Batteries

      There are two types of batteries for Parklio Barrier: 1. Single capacity battery (normal) 7.4 V nominal, 3200 mAh, 23.7Wh 2. Double capacity battery 7.4 V nominal, 6400 mAh, 47.4Wh

    • The Barrier Is Jammed

      If your Barrier is jammed there could be multiple reasons and solutions. First check if your Barrier is hit, there could be deformations in Safety Pin and arch and in that case only installing new parts can resolve situation. Also if you Barrier is ...