Gateway technical specifications

Gateway technical specifications

Input Voltage

85 VAC - 264 VAC

120 VDC - 370 VDC

Frequency

47 Hz - 440 Hz

AC Current (Typ.)

0.35 A / 230 VAC (1)

Inrush current

40 A / 230 VAC

Working temperature range

-20 °C - +60 °C

Working humidity

Up to 90% RH

Operating altitude

1000 m 

Ingress rating

IP65

Dimensions

220 mm x 220 mm x 50 mm (H x W x D)

Pole mount diameter

∅60 mm - ∅125 mm

Weight

750 g

LED

4 status LEDs 

LAN

10/100BASE-T with waterproof connector

Wireless Connectivity

BLE

LTE with 3G/2G fallback

Software upgrades

Yes, automatic update checking via web

Antenna interface

Internal BT and 4G/3G/2G antennas

Color

Lava and white grey

Max. supported devices

Max. 20 Parklio™ BLE devices can be associated with one gateway

    • Related Articles

    • Gateway update

      All the new Gateways from 2023 year should have automatic update. If your Gateway is working properly you don't have to worry about future updates. In case there are problems with Gateway please search our Knowledge base for answer or contact Parklio ...

    • Gateway ID and password

      On the Gateway back side there is a sticker with the gateway UUID (Unique ID / Serial Number) identifying the gateway. Please keep this in mind, the serial number is used when adding the gateway to the user account and when accessing the gateway web ...

    • Connecting to Gateway interface

      To access the web interface of the product, simply use a browser to connect to http://ipAddress:8765 (http://ipaddress:8443 is also available for 2.0.8 firmware) , where ipAddress is the gateways IP address. When logging in to the gateway interface ...

    • Gateway signal for barrier

      For normal functioning, the signal between Gateway and the Barrier should be at least -80 dBm when car is not over barrier. When car is over barrier it is considered as object and it is normal that barriers have low signal due to obstacle.

    • Client erased Gateway from App

      If you erased Gateway from App and you want to add it again follow next procedure: Reset Gateway manually by clicking shortly on Reset button on Gateway Al light should make short blink Go to application, enter parking lot and add Gateway again