Gateway installation guide - pole mount

Gateway installation guide - pole mount

The gateway is mounted to a pole via a single hose clamp. The gateway comes with a clamp holder and four M4 screws for installing a hose clamp carrier to the gateway. 


Step 1


Position the pole mount holder so that the holes of the pole mount holder coincide with the holes on the back of the Parklio™ Gateway. Use the screwdriver and the provided M4 screws to fix the pole mount holder.

Step 2


Unscrew the hose clamp.

Step 3


Pull the hose clamp through the holes on the sides of the pole mount holder.

Step 4


Wrap the desired spot on the pole with the hose clamp and use the screwdriver to tighten the hose clamp.

    • Related Articles

    • Gateway installation guide - wall mount

      Good placement of the Gateway is very important for correct system functionality. Try to position the gateway as close to the products as possible. Do not place the Gateway in an enclosed area such as a closet, cabinet, attic, office or garage if the ...

    • Gateway technical specifications

      Input Voltage 85 VAC - 264 VAC 120 VDC - 370 VDC Frequency 47 Hz - 440 Hz AC Current (Typ.) 0.35 A / 230 VAC (1) Inrush current 40 A / 230 VAC Working temperature range -20 °C - +60 °C Working humidity Up to 90% RH Operating altitude 1000 m Ingress ...

    • Gateway update

      All the new Gateways from 2023 year should have automatic update. If your Gateway is working properly you don't have to worry about future updates. In case there are problems with Gateway please search our Knowledge base for answer or contact Parklio ...

    • Gateway ID and password

      On the Gateway back side there is a sticker with the gateway UUID (Unique ID / Serial Number) identifying the gateway. Please keep this in mind, the serial number is used when adding the gateway to the user account and when accessing the gateway web ...

    • Gateway server code: 106

      This error can occur when a Gateway is already associated with one account, and the client attempts to add it to another account. To avoid this, it is important to follow the proper steps to remove the Gateway from the initial account in the Parklio ...