Gate X Solar Automatically Open When Batteries Run Low?

Gate X Solar Automatically Open When Batteries Run Low?

There is a built-in setting that allows a solar-powered gate to open automatically when the inverter’s batteries are nearly empty. The answer is yes—at least for systems like the Parklio Gate X, which includes specific configurable parameters for this scenario.

Automatic Opening on Low Battery

The Parklio Gate X system provides two settings that can be adjusted to trigger automatic gate opening when battery voltage drops below a certain threshold. This feature is particularly useful in solar installations, where maintaining access is more important than keeping the gate closed during low power conditions.

Key Settings Explained

  • Setting 85 → Value 01
    When this setting is enabled, the gate will receive an open command as soon as the battery voltage drops below 22V. This ensures immediate response to low battery levels.
  • Setting 86 → Value 02
    This setting adds a delay condition. If the battery voltage remains below 22V for more than 30 seconds, the gate will automatically open. Once opened, it will remain open until the battery voltage rises above 22V again.

Why This Matters

In solar-powered gate systems, battery levels can fluctuate depending on sunlight and usage. These settings help prevent situations where the gate might become stuck closed due to insufficient power—ensuring continuous access when it’s needed most.

    • Related Articles

    • Solar Gate - Product Description and Technical Specifications

      The Inverter board provides the PARKLIO GATE control units with the optimal power supply voltage to allow the operation of the automated system, using a 12V battery pack and photovoltaic panels. The Inverter is equipped with a 128x64 dot LCD display ...

    • How to Connect Push Button to Gate X

      To connect a Parklio™ push button to the Gate X, run two wires from the push button contacts to the AP and COM terminals on the Parklio™ Gate X control board. Refer to the images below for a clear illustration of the connection. A photo of the wiring ...

    • Gate Opens and Closes Uncontrollably

      If a Parklio Gate begins to open and close uncontrollably after a period of normal operation, the most common causes are either the photocells or the Gate configuration itself. In most cases, the first step is to check whether the photocells are ...

    • RFID Wiring diagram for Gate X

      Photo of a wiring diagram between Parklio Gate X and Parklio RFID is available on the link below: https://file.parklio.co/file/fyw2e6bfd7da92c5448fba1abf702c2940ec5

    • Parklio Flashing Light to Gate X Connection

      This article provides wiring diagrams for connecting a Parklio flashing light, or a flashing light from another manufacturer, to Gate X. Important: These wiring diagrams apply only if Gate X does not have an LED stripe connected. Photo of a wiring ...