Electrical connections - Wiring diagram

• Related Articles

• Electrical connections for installation

  Before proceeding with the physical installation of the chain system, it is essential to prepare the power supply connections. 1. Power Supply to Master Unit The primary connection involves supplying power to the master unit. Use a 230V-50Hz power ...

• Slave Unit Does Not Fully Close – Power Supply Cable Check

  If the slave unit of the Parklio™ Chain Barrier does not fully close, as shown in Picture 1, the most common cause is an insufficient or incorrect power supply cable between the master and slave units. Possible Cause The slave unit may not be ...

• Chain Installation Guide: Power Supply, Master/Slave Setup & Photocells

  Before installing the Chain unit itself, it is necessary to complete the power supply installation and connect the master and slave units according to the instructions provided in the user manual. Proper preparation ensures smooth operation and ...

• Parklio Chain - No option in App

  If you have screen like this for Parklio Chain, you should check IO0 and IO1 connections on Parklio Brain and Chain's control board. It is probably loose contact. Secure it and try again.

• Chain stops halfway on automatic mode

  If the chain doesn’t go all the way up or down as it should when controlling the App, the problem is probably in switches inside the chain. Switches must be inspected and returned to their own position. There are two switches behind inner chain in ...