The Client Erased the Gateway From Parklio Connect App
If you have removed the Gateway from the app and want to add it again, please follow the procedure below:
Reset the Gateway manually by briefly pressing the Reset button on the Gateway.
The AL light should blink shortly.
Open the application, go into the parking lot, and add the Gateway again.
Related Articles
Client Cannot Find the Gateway Inside the App
When all the LED lights are on and you have to add Gateway to App, press the Reset button shortly on Gateway and refresh the list of devices inside the App. Gateway will show on the list for approximately 60 seconds. That is the window in which you ...
Adding Gateway - Server Code: 6
When you are trying to add Gateway to PMS account and you get error: Whoops - Resource not found or no permissions. Server code: 6. That means your Gateway is not online, there is no valid internet connection and in that case your LED lights will ...
Signal Issues Between Gateway and Barrier
Signal Requirements Recap: The signal should be at least -80 dBm when no car is over the barrier Signal strength can be checked in Parklio PMS by hovering over the signal icon in the Dashboard Additional Steps to Improve Signal: Relocate the Gateway ...
Gateway server code: 106
This error can occur when a Gateway is already associated with one account, and the client attempts to add it to another account. To avoid this, it is important to follow the proper steps to remove the Gateway from the initial account in the Parklio ...
Gateway Technical Specifications
Input Voltage 85 VAC - 264 VAC 120 VDC - 370 VDC Frequency 47 Hz - 440 Hz AC Current (Typ.) 0.35 A / 230 VAC (1) Inrush current 40 A / 230 VAC Working temperature range -20 °C - +60 °C Working humidity Up to 90% RH Operating altitude 1000 m Ingress ...