Controlling Multiple Barriers Simultaneously

Controlling Multiple Barriers Simultaneously

Multiple barriers can be controlled at the same time using the I/O Board.

By wiring together barriers equipped with an I/O Board, they can open or close simultaneously. The same can also be done with a push button, which can trigger multiple connected barriers at once.

For larger setups, multiple barriers can also be managed through Parklio PMS from one platform.

In the future, this functionality will also be available in the Parklio Connect App, allowing users to control multiple barriers and create grouped actions directly from their phone.


    • Related Articles

    • Can multiple Barriers be controlled at the same time?

      Yes, multiple barriers can be controlled to lower and extend simultaneously. Currently, this functionality is available through the I/O Board accessory. In the future, this feature will also be integrated into the Parklio App, allowing for seamless ...

    • How to Connect Parklio™ Parking Barriers with Universal Remote Controllers

      To enable control of your Parklio™ Barrier using universal remote controllers, please follow the steps below carefully. Step 1: Update the Barrier Firmware Make sure your Parklio™ Barrier firmware is updated to version 1.4.15. You can perform the ...

    • Range of Bluetooth for Barriers

      The barrier uses Bluetooth Low Energy to communicate with your smartphone. Typical range is 100 metres but in normal urban conditions it ranges around 30 m - 50 m.

    • First Troubleshooting Step for Any Battery-Powered Barrier Issue

      For battery-powered barriers, the battery may be supported by solar charging. However, solar charging is not capable of recovering a fully depleted battery; it can only reduce the rate of further discharge. If the battery is completely empty, it must ...

    • Condensation/water inside solar panel

      On some of the barriers it is possible for condensation to form due to differences in outside temperature. Condensation is not interfering with work of solar panel or barrier so it is not necessary to change panel or whole cover. Our production team ...