Can multiple Barriers be controlled at the same time?
Yes, multiple barriers can be controlled to lower and extend simultaneously. Currently, this functionality is available through the I/O Board accessory.
In the future, this feature will also be integrated into the Parklio App, allowing for seamless control. Clients will be notified via regular communication channels once the app update is available.
Related Articles
Controlling Multiple Barriers Simultaneously
Multiple barriers can be controlled at the same time using the I/O Board. By wiring together barriers equipped with an I/O Board, they can open or close simultaneously. The same can also be done with a push button, which can trigger multiple ...
How to Connect Parklio™ Parking Barriers with Universal Remote Controllers
To enable control of your Parklio™ Barrier using universal remote controllers, please follow the steps below carefully. Step 1: Update the Barrier Firmware Make sure your Parklio™ Barrier firmware is updated to version 1.4.15. You can perform the ...
Range of Bluetooth for Barriers
The barrier uses Bluetooth Low Energy to communicate with your smartphone. Typical range is 100 metres but in normal urban conditions it ranges around 30 m - 50 m.
Barrier connection for the first time
Ensure that the battery is fully charged. Devices come with a battery charged to 20% due to transportation legislation and optimum cold storage values. When the device battery is connected to the barrier, the LED should blink with a green light. ...
LED is on all the time - Older version of barrier
If the LED light is constantly green, it likely indicates a hardware issue, preventing the barrier from functioning properly until the problem is resolved. There is usually problem with motor tube or cover, which contains solar panel, sensor etc. ...