Bollard power Voltage and Power draw

Bollard power Voltage and Power draw

The bollard operates on a 230V power supply, which is the standard mains voltage across Europe. If you are in the United States, where the standard mains voltage is 115V-120V, we provide a transformer/voltage converter. This device ensures the safe operation of the bollard by converting the 120V US mains voltage to the required 230V.

For users who prefer a direct 24V power supply, the bollard board allows direct connection, bypassing the need for a mains voltage conversion.

Power Consumption & LED Functionality

  • The bollard itself draws approximately 200W during operation.
  • The internal LED lighting system is powered by 24VDC, supplied through the control board.
  • The LEDs change color based on the bollard’s status:
    • Solid blue/red when the bollard is raised
    • Flashing green during operation
  • If needed, the LEDs can be powered separately for custom applications.

This flexible power design ensures adaptability for different regions and operational preferences while maintaining safe and efficient functionality.




    • Related Articles

    • How to connect Master and Slave bollard

      Please look at the wiring diagram how to connect Master and slave bollard: Also some programming is needed: In this case you just install photocells for master bollard.

    • Bollard remotes adding and erasing

      Please find all the instructions for adding and erasing bollard remotes:

    • Emergency Bollard lowering

      In case your bollard is not working properly and you need to get it lowered, use physical keys you got with your Parklio Bollard to unlock the Bollard and lower it manually. After unlocking, the Parklio Bollard will descend automatically. In case of ...

    • Bollard clicking but not moving

      Check that the Bollard is not in manual mode Check that there is power on the bollard Do the Automatic learning process

    • Bollard Solar kit - Electrical connections and Junction box

      Junction box mounting Mount the Junction box vertically on a non-flammable substrate, with the electrical terminals facing downward. The Dimensions drawings chapter of this manual contains a dimension drawing of the solar panels and Junction box. ...