Bollard's IP rating is IP 55.
Protected from limited dust ingress. Protected from low pressure water jets from any direction.
Related Articles
How to connect Master and Slave bollard
Please look at the wiring diagram how to connect Master and slave bollard: Also some programming is needed: In this case you just install photocells for master bollard.
Parklio Bollard K8 and PAS68 rating
Parklio Bollard is not rated with K8 or PAS 68 certifications, as it is not designed for anti-terrorist purposes
Bollard remotes adding and erasing
Please find all the instructions for adding and erasing bollard remotes:
Bollard photocells
Two pairs of photocells are always delivered together with Parklio Bollard device and connected to the control box using a UTP cable. Every photocell has its own transmitter that must be installed on site depending on the Bollard desired position. ...
Bollard Control Box Overview
Each bollard is delivered with a control box responsible for powering and controlling the device. The control box manages the electrical supply and communication required for the bollard to operate properly. Control Box Dimensions The dimensions of ...