Battery Is Not Responding (older type of batteries)

Battery Is Not Responding (older type of batteries)

If the LED light on the Parklio Barrier battery is not turning on, there are a few possible solutions:

1. Battery is fully charged, in that case LED light on battery is off as it confirms that battery is fully charged
2. Battery is damaged and needs to be replaced
3. Battery is not connected on charger





    • Related Articles

    • Parklio Barrier Batteries

      There are two types of batteries for Parklio Barrier: 1. Single capacity battery (normal) 7.4 V nominal, 3200 mAh, 23.7Wh 2. Double capacity battery 7.4 V nominal, 6400 mAh, 47.4Wh

    • New Battery Update for Parklio™ Barrier – Starting December 2024

      Starting December 2024, the Parklio™ Barrier will feature a cutting-edge battery system with the following enhancements: Key Updates: Integrated Charging Connection The new battery pack eliminates the separate charger input. Chargers will now connect ...

    • Keyfob Battery Change - Barrier

      To replace the battery in the keyfob, please follow the instructions in the link below: https://drive.google.com/file/d/1E2COe2Cf0fc9YfWmZMvF6YBJ6BjgMHOJ/view?usp=sharing It is important to use something sharp as scalpel.

    • The Battery Loses Power Quickly

      If the battery is losing power unusually fast, for example if it lasts only one week under regular use, there are a few possible causes to consider: 1. Damaged battery You can check the battery condition by placing it on the charger and observing the ...

    • Barrier's Battery Status Overview in Parklio Connect

      The battery level is shown as a percentage on the main product page and is categorized as follows: ? Good: 70% – 100% ? Moderate: 31% – 69% ? Charge: 30% and below When the battery level reaches 30% or lower, a warning message will appear: “Charge ...