Barrier's Battery Status Overview in Parklio Connect

Barrier's Battery Status Overview in Parklio Connect

The battery level is shown as a percentage on the main product page and is categorized as follows:

  • 🟢 Good: 70% – 100%
  • 🟡 Moderate: 31% – 69%
  • 🔴 Charge: 30% and below

When the battery level reaches 30% or lower, a warning message will appear: “Charge battery”.


Below is a list of voltages and percentages for the Parklio battery:

Voltage (mV) 

%

6200 

0 %

6600 

10 %

6850 

20 %

7000 

30 %

7150 

40 %

7300 

50 %

7450 

60 %

7650 

70 %

7750 

80 %

7925 

90 %

8075 

100 %

    • Related Articles

    • New Battery Update for Parklio™ Barrier – Starting December 2024

      Starting December 2024, the Parklio™ Barrier will feature a cutting-edge battery system with the following enhancements: Key Updates: Integrated Charging Connection The new battery pack eliminates the separate charger input. Chargers will now connect ...

    • How to Resolve the “Dirty Sensor” Error

      After cleaning the device sensor, the device sensor does not automatically change the state since the laser is only triggered by environmental changes to preserve battery life. Steps to remove the error: Remove any obstruction on the laser Clean the ...

    • Adding a Keyfob to a Barrier

      Before adding a Keyfob, make sure Bluetooth, Location, and internet access are enabled on your mobile phone. To add a new Keyfob, follow these steps: Connect to the Barrier. In Settings, tap Add Keyfob. Press and hold the button on the receiver until ...

    • Parklio Barrier Batteries

      There are two types of batteries for Parklio Barrier: 1. Single capacity battery (normal) 7.4 V nominal, 3200 mAh, 23.7Wh 2. Double capacity battery 7.4 V nominal, 6400 mAh, 47.4Wh

    • How to Connect Parklio™ Parking Barriers with Universal Remote Controllers

      To enable control of your Parklio™ Barrier using universal remote controllers, please follow the steps below carefully: Step 1: Update the Barrier Firmware Make sure that your Barrier firmware is updated to version 1.4.15 You can preform the update ...