Adding a Barrier to the Connect App
To add a Barrier to the Connect App:
1. Turn on Location, Bluetooth, and mobile data.
2. Open the app.
3. Tap the + icon in the top-right corner.
4. Tap the barrier you want to add.
5. The barrier will connect and appear in My Parklios.
You can find a photo of the Parklio Connect user interface while adding a new device at the following link:
Related Articles
Adding a Keyfob to a Barrier
Before adding a Keyfob, make sure Bluetooth, Location, and internet access are enabled on your mobile phone. To add a new Keyfob, follow these steps: Connect to the Barrier. In Settings, tap Add Keyfob. Press and hold the button on the receiver until ...How to Connect Parklio™ Parking Barriers with Universal Remote Controllers
To enable control of your Parklio™ Barrier using universal remote controllers, please follow the steps below carefully: Step 1: Update the Barrier Firmware Make sure that your Barrier firmware is updated to version 1.4.15 You can preform the update ...How to Resolve the “Dirty Sensor” Error
After cleaning the device sensor, the device sensor does not automatically change the state since the laser is only triggered by environmental changes to preserve battery life. Steps to remove the error: Remove any obstruction on the laser Clean the ...Key Exchange Error
SCAN_FAILED_DEVICE_NOT_FOUND The phone was not able to find the device during a rescan. This might go away by simply retrying again. If not, ensure that the device is properly connected. Also ensure that the device has the LOCATION PERMISSIONS needed ...How to Delete a Barrier From the App
The attached video shows the process of deleting a Parklio Barrier from the Connect App.