Adding keyfob for the bollard
To access the P menu press the MENU button for 1 sec.
Use up and down arrows to navigate through the menus.
Go to P9
Press MENU will appear .
Press MENU to edit the value.
Use UP and DW to change the value.
Press MENU to save the new value.
Press MENU when you want to confirm access to a menu.
Press up and down arrows simultaneously to exit programming.
Related Articles
Bollard remotes adding and erasing
Please find all the instructions for adding and erasing bollard remotes:How to connect Master and Slave bollard
Please look at the wiring diagram how to connect Master and slave bollard: Also some programming is needed: In this case you just install photocells for master bollard.Bollard installation - standard model
Please be aware that all installation instructions have to be respected for your warranty to be valid. A - Sewer B - Sand C - Cement The pre installation process involves digging a hole, installing drainage for water runoff, threading the cable ...Bollard photocells
Two pairs of photocells are always delivered together with Parklio Bollard device and connected to the control box using a UTP cable. Every photocell has its own transmitter that must be installed on site depending on the Bollard desired position. ...Emergency Bollard lowering
In case your bollard is not working properly and you need to get it lowered, use physical keys you got with your Parklio Bollard to unlock the Bollard and lower it manually. After unlocking, the Parklio Bollard will descend automatically. In case of ...