2.4 GHZ Antenna for Bollard

2.4 GHZ Antenna for Bollard

BLE Antenna Installation & Range Considerations

The provided antenna comes with a 1-meter cable, allowing for flexible installation away from the control board. However, since this is a Bluetooth Low Energy (BLE) antenna, its placement should take the total range into account to ensure optimal performance.

BLE Module Range

The effective range of the BLE module varies between 30 to 50 meters (100 to 165 feet), depending on environmental factors such as:

  • Obstructions (walls, metal structures, or interference from other devices)
  • Open vs. enclosed spaces (performance is better in open areas)

For best results, install the antenna in a location that minimizes signal interference and maximizes communication efficiency.

    • Related Articles

    • How to connect Master and Slave bollard

      Please look at the wiring diagram how to connect Master and slave bollard: Also some programming is needed: In this case you just install photocells for master bollard.

    • Bollard remotes adding and erasing

      Please find all the instructions for adding and erasing bollard remotes:

    • Bollard photocells

      Two pairs of photocells are always delivered together with Parklio Bollard device and connected to the control box using a UTP cable. Every photocell has its own transmitter that must be installed on site depending on the Bollard desired position. ...

    • Emergency Bollard lowering

      In case your bollard is not working properly and you need to get it lowered, use physical keys you got with your Parklio Bollard to unlock the Bollard and lower it manually. After unlocking, the Parklio Bollard will descend automatically. In case of ...

    • Bollard IP rating

      Bollard's IP rating is IP 55. Protected from limited dust ingress. Protected from low pressure water jets from any direction.